2010 Camaro
Click the image below to start the video.
Aerodynamic Upgrades
MTI RACING has gone to great lengths to test and verify the products it sells. You can rely on the fact that it has been tested under the highest of standards and procedures.
Front Splitter for C6-Z06 Models Only
Made from pure Carbon Fiber and developed in the wind tunnel for proven results. Can be used for both the street and track. Extends about 1" lower and 2" forward than factory valance. Flat belly section covers 25" underneath car. Comes in clearcoated finish. We also offer the splitter with an upgraded forced air induction system for added cooling to the brake rotors. This feature was added as wind tunnel tests had proved the factory inlets to be non- functional.
Front Splitter - $1895
Front Splitter with brake ducts - $2195
Front Splitter with brake ducts and high powered brake blowers, installed - $3195
Front Chin Spoiler for C6-Z06
Made from pure Carbon Fiber. A great way to dress up your C6-ZO6 and provide high-speed stability. Extends about 2" forward and I" lower than factory valance, attaches using factory body clips.
Front Chin Spoiler in clear coated carbon - $995
Front Chin Spoiler in paintable composite - $795
Rear Spoiler C6 and C6-Z06
Made from pure Carbon Fiber and developed in the wind tunnel for proven results. Can be used for both the street and track. When combined with our front splitter our aerodynamic package for the C6-ZO6 Corvette produced a reduction in drag by 30 counts, plus increased downforce 39 lb.. on the front and 25 lb.. in the rear. Spoiler is 4" tall and uses the factory mounting location. Carbon Fiber piece comes in clearcoated finish and fiberglass piece is not painted
Rear Spoiler in clear coated carbon - $1295
Rear Spoiler in paintable composite - $1095
MTI Racing Extractor Hood by Hi-Tech for C6 Coupe and C6-Z06
These hoods which are part of our new Supercharged LS7 Engine Upgrade. Can now be purchased as a separate add-on item for your C6 Coupe or C6-ZO6! This Extractor hood is available in either Clearcoated Carbon Fiber or Paintable Composite. Additional benefits include lower under-hood temperatures, and increased downforce by sucking out the air inside the engine compartment!
Extractor Hood in clear coated carbon - $1695
Extractor Hood in paintable composite - $1245
Shipping Info:
These pieces are usually in stock, but please allow 2 weeks production time just in case of higher demand when you place your order.